Warranty

Guarantee according European Union guidelines if the handling in accordance with provided instruction for use takes place.

KETTENMAX Premium Instruction for use:

The KETTENMAX Premium can be used for both left and right side drives!

Turn off the engine, and insert the gear in neutral position.
Jack up the motorbike on the main or paddock stand.

1. Select, set up, put on and lock
   Measure the chain width with template, select the right brushes according to the template colour and put them into the KETTENMAX (bottom box). Assemble the upper and bottom box at an easy accessible point (according to motorbike type in front or behind the bed of tire) and lock with the rubber band. Then screw the drain bag onto the KETTENMAX (bottom box).
   
   
2. Hanging in, fixation
   Ideal: Hanging in at the front and at the rear, and stretch with the quick release fastener. Rotation is possible in both directions. Hanging in according to type of motorbike only in the front or at the rear. Rotation is only possible in one direction.
   
   
3. Cleaning
   Attach the screw cap with nozzle to the bottle of cleaner, connect hose with nozzle and Y-distributor, connect hoses with Y-distributor and KETTENMAX. Always connect the hoses to the upper (chain ingoing side) and bottom nozzle connection at the KETTENMAX. With direction change of rotation: reverse the upper hose. Supply cleaner proportional, rotate the rear wheel slowly (2 x chain run per minute). A gentle overall cleaning of the chain is ensured.
   
   
4. Drying
   After the cleaning, unscrew the bottle and close with the original cap. Disconnect the hoses from the KETTENMAX. Let the chain dry for about 3 to 5 minutes.
   
   
5. Lubricating
   Putt the lubricating adapter on the upper nozzle connection at the KETTENMAX (chain outgoing side). Spray in the lubricant in steps. Rotate the rear wheel slowly (2 x chain runs per minute). The lubricant accurately coats the important inner side of the chain and is evenly distributed by brushes.
   
   

Contaminated cleaning solution and any excess lubricant will be drained into the drain bag and appropriately disposed of in an environmentally friendly manner "hazardous waste".

After finishing the cleaning and lubricating process. Remove the spray and lubricating adapter from the KETTENMAX. Remove the drain bag and close with the screw cap. Disassemble the hooks, cords and KETTENMAX carefully.